home pageabout us pageproducts pagedevelopments pageshop page

boats pagerig kits pageparts pagesails pagefittings pagefasteners pagemisc page

hull pagemast pageboom pagerigging pagevintage page

Hull Fittings

Downloadable drawings - please see instructions at the bottom of the page.

  Ref Description   Price  
  28-150 Deck track SAILSetc section supplied with stainless steel fixing screws & nuts, 150 mm 3.00
  28-330 Deck track SAILSetc section supplied with stainless steel fixing screws & nuts, 330 mm 4.00
  28-500 Deck track SAILSetc section supplied with stainless steel fixing screws & nuts, 500 mm 4.75
  31SET Plate, cup and connector (2 of each for one hull)
Plate, cup and connector 9.50  
  34 Eyebolt As rigging screw end, 25 mm long, M3.5 1.20
  35 Eyebolt Nickel plated brass, 15 mm long, M3.5 1.20
  37A Eyebolt As rigging screw end, 20 mm long. M3 1.20
  37B Eyebolt, flat sides 20 mm long, M3 1.20
  37C Eyebolt, swivelling version Swivelling version by PKB, M3 2.75
  38A Eyebolt, use with deck track Use with SAILSetc deck track, 6 mm long, M3.5 1.05
  38B Track slide with eyebolt with screw for locking in place 3.75
  38C Track slide with eyebolt Lock wheel for quick and easy adjustment 5.70
  38D Track slide with swivelling hook on ball race Lock wheel for easy adjustment 10.25
  39A Track slide for mast heel fitting With screw for locking in place 1.10
  52A Fairlead, PTFE To fit 6 mm internal dia 1.15
  52C Fairlead, Acetal alternative to 60b/c/d to bold through 10 mm internal diameter hole 3.50
  52MT Mainsheet post, with metal trunking for adjustable mainsheet position 11.75  
  52CF Mainsheet post Height adjusable Acetal post with carbon/epoxy trunking 14.50  
  52GL Mainsheet post as 52MT but with glass/epoxy trunking, for IOM class 14.50  
  53 Fairlead, PTFE ring PTFE ring for adjustable mainsheet position 1.15
  54 Screw top pot Super light containment for receiver and batteries, 23 grams, 67 mm OD, 83 mm deep including lid 1.00
  60A Sheet lead, raised 8 mm offset above/below deck 8.50
  60B Sheet lead, flush 15 mm offset below deck 8.50
  60C Sheet lead, flush 15 mm offset below deck 8.50
  60D Sheet lead, flush 10 mm offset below deck 8.50
  60Z Sheet lead, outlet at 60 degrees to horizontal outlet at 60 degrees to horizontal 8.40  
  61A Single block, with shackle PKB 5.90
  61B Single block, with shackle PKB 5.90
  61H Single block, with shackle Hales, stainless steel 13.00
  61HOLT Heavy duty block single block on swivel for use with RMG380 on A Class, AC/12, AC/10 11.25  
  61S Block - new high strength for use with RMG winches 16.75  
  62 Double block, with shackle PKB 7.00
  63 Single block, for deck mounting PKB 5.90
  63H Single block, for deck mounting Hales, stainless steel 12.25
  64 Double block, for deck mounting PKB 7.00
  64H Double block, for deck mounting Hales, stainless steel 16.00
  65 Through deck block PKB 7.90
  65B Cover for through deck block No 65 Silicone rubber 5.00
  66A Servo/tiller arm ball joint connector To fit 3 mm and 5.6 mm internal dia tube 2.40
  66B Servo/tiller connector, to match 66a alloy tube, 300 mm long, 5.6 mm ID' 3.60  
  66C Servo/tiller connector strut, complete unit easy to adjust completed unit comprising 66b and 66d 12.75  
  66D Serve/tiller connector ends pair of end fittings , LH & RH 9.20  
  67B Servo arm extension, stainless steel for Futaba and Multiplex arms 2.70  
  67C Quick release system for rc installation for winch & servo, with drawing 6.50
  67D Arm for Hitec sail control servo Carbon, adjustable, 75/85 mm 6.75
  67F Drum for Hitec sail control servo
Downloadable drawings		 Acetal, 100 mm OD, 90 mm ID 24.00  
  67G Fairlead bracket moulding
Downloadable drawings		 glass or carbon, for use with 67f, drum for Hitec sail control servo 5.90  
  67H Moulded block mounting glass or carbon 5.90  
  67J Tension spring
Downloadable drawings		 60 mm long x 6.5 mm dia. for tensioning sheet loop, stainless steel 1.30  
  68A Tiller arm, black anodised alloy 6 mm dia (also fits 1/4 in dia stock) 0.90
  68C Tiller arm, plastic with metal collar 3 mm dia (can be drilled to 4 mm dia) 3.60
  68-030 Tiller arm, carbon/epoxy For 3 mm dia 8.75  
  68-040 Tiller arm, carbon/epoxy For 4 mm dia 8.75
  68-050 Tiller arm, carbon/epoxy for 5 mm dia stock 8.75  
  68-060 Tiller arm, carbon/epoxy For 6 mm dia 8.75
  69-040 Rudder stock & tube, with seal 4 mm dia ss stock, plastic tube 13.50  
  69-050 Rudder stock & tube, with seal 5 mm dia alloy stock, plastic tube 14.25
  69-060 Rudder stock & tube 6 mm dia CF stock, 8 mm dia CF tube 4.50
  69E Top bearing for rudder stock Top bearing for rudder stock 1.10  
  69F Top bearing, for rudder stock For 4 mm dia stock 4.75
  69G Top bearing, for rudder stock For 6 mm dia stock 4.75
  86 Tapered bung For drain hole, 20 x 8 > 4 mm dia 0.45
  144T Mast/deck screw adjuster stainless steel and plastic 5.60
  SWA Switch A,  no cover toggle switch ready to add leads 4.40
  Cover Rubber cover for Switch A or B 3.30
  SWB Switch A, cover +HD 400 mm leads, water resistant Switch A + cover + HD 400 mm leads, water resistant 24.00  

-  back to the top  -

All prices are in GBP and include VAT.
For prices outside Europe – deduct 14.9%.

On some computer systems, Firewalls and settings in Browsers can prevent the small 'Pop Up' windows and text which are shown when the icon icon is clicked on or hovered over. This is down to each individual PC setup and outside of our control but you may be able to adjust your PC's settings so the 'Pop Up' windows become visible.

To download the drawings you will need Adobe Acrobat reader, which if you do not have, can be downloaded via the icon below.

Get Adobe Reader Right Click on the text 'downloadable drawing' and choose 'save target as' to download to your PC. Trying to open the files from the page will probably result in failure.

 
Home | About us | Products | Developments | Shop

Boats | Rig Kits | Parts | Sails | Fittings | Fasteners | Misc

Hull | Mast | Boom | Rigging | Vintage

©2002-2008 SAILSetc