home pageabout us pageproducts pagedevelopments pageshop page

boats pagerig kits pageparts pagesails pagefittings pagefasteners pagemisc page

hull pagemast pageboom pagerigging pageMicro pagevintage page

Micro Fittings


  Ref Description Price
  12MM Gooseneck/compression strut - new The body of this gooseneck is injection moulded and houses 8 mm ID bearings to fit a 8 mm diameter mast. 43.50
  12RG Gooseneck/compression strut - new Eye only, plain brass, 11.5 mm long x 6 mm dia, 20/pack 43.50
  22-RG Backstay crane, carbon/epoxy mast tube, to suit RG65 class POA  
  23-003 Head fitting with ball races - new For 3 mm ID mast tube, to suit RG65 class 11.75  
  30-020 Rigging screw, single end For shrouds and kicking straps, M2.0, each 4.20
  32-020 Rigging screw, double ended For jumper and diamond stays, 17-20 mm, each 2.50
  32-030 Rigging screw, double ended For jumper and diamond stays, 23-30 mm, each 2.25
  48-RG Boom bands, 4, 4.5, 5, 5.5 & 6 mm diameter - new glass filled plastic, set of 5 1.25
  52-003 Fairlead - new To fit 3 mm internal dia 1.70
  55-006 Mast band with flange, carbon/epoxy - new To fit 6 mm diameter, drilled for attachment

5.00
  57X Bowsies Miniature in stainless steel, 7 mm x 3 mm, 10/pack 4.25
  58-004 Silicone tubing 2.5 mm ID - new 100 mm, to fit 4 & 4.5 mm booms 0.75
  58-006 Silicone tubing 3.2 mm ID - new 100 mm, to fit 5, 5.5 & 6 mm booms 1.00
  61-008 Block, ball raced, with 8 mm sheave - new with 8 mm sheave 12.50
  67E Arm for sail control servo - new stainless steel, for high torque servos 4.50
  68-025 Tiller arm, stainless steel - new For 2.5 mm stock 10.50  
  120-050 Headsail swivel, with ball race,
adjustable - new		 for 5 mm diameter boom’ 11.00
  120-060 Headsail swivel, with ball race,
adjustable - new		 for 6 mm diameter boom’ 11.00
  139-008 Pair of bearings PTFE - new Heel & upper bearings for a swing rig, for 8 mm diameter 4.60
  200-007 Ballast, bulb, 0.7 kg - new to suit RG65, with slot, 0.7 kg, cast state 43.75
  338RG Fin box/mast tubes Carbon/epoxy moulding for RG65 and Footy class, 6 mm wide trunking for fin to take 370RG. Use the moulding one way to give two masts tubes and the other way to give a single mast tube in an intermediate position 40.00
  360RG Rudder, 6% t/c – 170 x 50 mm - new
 Rudder with 2.5 mm diameter carbon stock suitable for RG65, Footy and other small yachts. Finished to section 63.25  
  370RG

Fin 6% t/c - RG65, Footy

 Suitable for RG65 and Footy classes and other yachts in the 300 mm to 700 mm range 92.50
 
BS-RG65
Tapered batten sets - new
 Set of tapered self adhesive battens suitable for RG65 class comprising in total 1 each of 60, 50, 40, 35 and 30 mm long. These are made of 0.2 mm glass/epoxy sheet with a self adhesive backing and need to be separated from each other before use. 2.50  
  D30 Dyneema For running rigging, white, braided. 0.5 mm dia, 30 kg BS, 20 metres 3.75
  W100 Straight stainless steel hook wire 1.0 mm dia, straight, 300 mm, for hooks and other fittings 0.20
 
CR008T
Carbon fibre tapered tube, 8.5 mm to 5.7 mm diameter
 High modulus carbon round tube, 1 mm wall thickness, 35 grams/metre, 1000 mm long 17.50

-  back to the top  -

All prices are in GBP and include VAT at 20%.
For prices outside Europe - deduct 16.67%.

On some computer systems, Firewalls and settings in Browsers can prevent the small 'Pop Up' windows and text which are shown when the icon icon is clicked on or hovered over. This is down to each individual PC setup and outside of our control but you may be able to adjust your PC's settings so the 'Pop Up' windows become visible.


 
Home | About us | Products | Developments | Shop

Boats | Rig Kits | Parts | Sails | Fittings | Fasteners | Misc

Hull | Mast | Boom | Rigging | Micro | Vintage

©2002-2011 SAILSetc