home pageabout us pageproducts pagedevelopments pageshop page

boats pagerig kits pageparts pagesails pagefittings pagefasteners pagemisc page

spars pagedecks pagefins pagerudders pagebulbs page

Fins


  Ref Description   Price  
  350D Fin, 6% t/c - 6M 370 mm length x 370 mm chord at bottom x 60 mm chord at top, fitted with internal structure, fits 350f, leading and trailing edges require finishing 166.00
  350E Fin, 6% t/c - A 420 mm length x 390 mm chord at base x 60 mm chord at top, fitted with internal structure, fits 350f, leading and trailing edges require finishing 182.00
  350H Fin, 6% t/c - A (2005) maximum 700 mm length x 290 mm chord at top x 80 mm chord at bottom, fitted with internal structure, allows choice of size and lay-up to suit application, fits 350g, leading and trailing edges require finishing 187.00  
  370A Fin 6% t/c - M, 10R 740 mm length x 150 mm chord at top x 75 mm chord at bottom, with lower 220 mm parallel, fitted with internal structure, leading and trailing edges require finishing 170.00
  370B Fin 6% t/c - M, 10R 740 mm length x 150 mm chord at top x 75 mm chord at bottom, with lower 220 mm parallel, fitted with internal structure, with edges fully finished 199.00
  370C Fin 6% t/c - IOM 470 mm length x 135 mm chord at top x 75 mm chord at bottom, with lower 50 mm parallel, fitted with internal structure, leading and trailing edges require finishing 131.00
  370D Fin 6% t/c - IOM 470 mm length x 135 mm chord at top x 75 mm chord at bottom, with lower 50 mm parallel, fitted with internal structure, with edges fully finished 151.00
  370LX Fillet - 370 A-D For 370a-d, to fit leading edge of fin or rudder 5.00
  FIN200 Fin/rudder section 70 x 7 mm machined from timber, 200 mm 5.00  
  FIN300 Fin/rudder section 70 x 7 mm machined from timber, 300 mm 7.50  
  INS-seat Ballast retaining nut screw to match INS-030, brass to resist wear 2.00  
  INS-030 Fin insert, bottom for IOM/M/10R, M3 studding, captive part for fin, plus nut to retain ballast 6.60  
  INS-040 Fin insert, top for IOM/M/10R, M4 bolt plus cpative part for fin 5.50  
  INS-080 Fin insert, top & bottom for A Class, 8mm Ø stub, M6 studding through fin, plus bolt to retain ballast 12.75  

-  back to the top  -

All prices are in GBP and include VAT.
For prices outside Europe – deduct 14.9%.

On some computer systems, Firewalls and settings in Browsers can prevent the small 'Pop Up' windows and text which are shown when the icon icon is clicked on or hovered over. This is down to each individual PC setup and outside of our control but you may be able to adjust your PC's settings so the 'Pop Up' windows become visible.


 
Home | About us | Products | Developments | Shop

Boats | Rig kits | Parts | Sails | Fittings | Fasteners | Misc

Spars | Decks | Fins | Rudders | Bulbs

©2002-2008 SAILSetc