home pageabout us pageproducts pagedevelopments pageshop page

boats pagerig kits pageparts pagesails pagefittings pagefasteners pagemisc page

spars pagedecks pagefins pagerudders page

Hull Parts


Unless otherwise specified, hull components for IOM are natural coloured
glass/epoxy and other mouldings are natural coloured carbon/epoxy.

Downloadable drawings - please see instructions at the bottom of the page.

  Ref Description   Price  
  67G Fairlead bracket moulding
Downloadable drawings 		glass or carbon, for use with 67f, drum for Hitec sail control servo 10.50  
  67RMG Block mount for bow
Downloadable drawings 		For mounting turning block in extreme bow of SAILSetc IOM 24.50  
  311A Stern recess moulding - new for RG65 class 18.00
  311D Pot recess Removable, for use with 311b/c 52.00
  311E Centre deck, fore part With mast recess, with coloured gel, for IOM 57.50
  311F Centre deck, fore part With mast recess, for M, 10R 65.00
  311M Centre deck For 6M/A with bump for mast, hollow for kicker and tray for rc equipment, 290 mm wide 104.50  
  311P RC mounting, universal universal mounting for pot, servo + winch 65.00  
  311Q RC mounting, universal This moulding is used to support the servo and winch in our production Marblehead and Ten Raters from mid 2010 onwards. It is optimised to support an RMG280 which is mounted first to a plate (item 67dia). The servo recess is designed for 40 x 20 or 42 x 21 mm servos. The third hole is the correct diameter for our rc pot (item 54). The recesses at the fore and aft ends of the moulding are to allow bonding onto the fin box and main sheet post trunking respectively. The moulding is supplied without the holes/recesses cut and without the fastening bolts. Normally made in carbon - can be supplied in glass 46.00  
  311R Pot recess A simple pot recess moulding that can be bonded under a flat deck to provide a flush fitting pot accessible in the deck. Normally moulded in glass/epoxy but can be provided in carbon/epoxy is requested. 25.75  
  311RG Mast recess moulding - new for RG65 class 35.50  
  330 Bow bumper for various, silicone rubber, for SAILSetc designs + others 7.25  
  330B Bow bumper – downloadable list of designs available send us your own mould and we will make a silicone rubber bumper for you 8.75  
  338B Mast tube - for swing rig A mast tube suitable for swing rig and allowing the rig to be raked fore and aft as requiired to adjust the balance. The forward tube of moulding 338D. 33.00  
  338C Fin box/mast tube The fin box and mast tube for shroudless rig supplied as a single unit. Suitable for use in Marblehead and 10R class yachts. 60.00  
  338D Fin box/mast tubes For M, 10R, for shroudless + swing rig, fits fin 370b 82.50
  338RG Fin box/mast tubes Carbon/epoxy moulding for RG65 and Footy class, 6 mm wide trunking for fin to take 370RG. Use the moulding one way to give two masts tubes and the other way to give a single mast tube in an intermediate position 40.00
  344D Fin box/mast tube glass/epoxy moulding for IOM class, fits fin 370c 61.50  
  344D-CF Fin box/mast tube carbon/epoxy moulding for M & 10 Rater class, fits fin 370b, rake mast using items 143-xxx 74.00  
  350G Fin box/mast tube For 6M/A, fits fins 350d/e and 350h 92.50  
  365A Deck beam 20 mm wide x 25 mm deep x 400 mm long 45.00
  365B Deck beam 20 mm wide x 25 mm deep x 200 mm long 23.50
  366A Deck beam 60 mm wide x 30 mm deep x 500 mm long 48.00
  366B Deck beam 60 mm wide x 30 mm deep x 250 mm long 25.00
  367A Foredeck + track recess 200 x 95 mm, for 6M and A Class foredeck 63.50  
  367B Beam + track recess 35 x 15mm, 600 long, CF or glass depending on use 58.50
  TUBEJ Tube glass or CF, for foredeck swivel, use with 52a, 6 mm ID 6.50  
TUBEM Tube glass or CF, for main sheet post, use with 52d, 9.2 mm ID 6.50  

-  back to the top  -

All prices are in GBP and include VAT at 20%.
For prices outside Europe - deduct 16.67%.

On some computer systems, Firewalls and settings in Browsers can prevent the small 'Pop Up' windows and text which are shown when the icon icon is clicked on or hovered over. This is down to each individual PC setup and outside of our control but you may be able to adjust your PC's settings so the 'Pop Up' windows become visible.

To download the drawings you will need Adobe Acrobat reader, which if you do not have, can be downloaded via the icon below.

Get Adobe Reader Right Click on the text 'downloadable drawing' and choose 'save target as' to download to your PC. Trying to open the files from the page will probably result in failure.

 
Home | About us | Products | Developments | Shop

Boats | Rig kits | Parts | Sails | Fittings | Fasteners | Misc

Spars | Booms | Hull Parts | Fins | Rudders | Ballasts

©2002-2011 SAILSetc